LIQUID DYNAMICS Ltd. offer Pulsation / Vibraton and Shock - Analysis & Diagnostics + Software Models
Please call toll free USA 1-888-326-7377 WE HAVE PEOPLE - Not voice mail. --44-161-480-9625 UK
|
LIQUID DYNAMICS Ltd. offer Pulsation / Vibraton and Shock - Analysis & Diagnostics + Software Models Please call toll free USA 1-888-326-7377 WE HAVE PEOPLE - Not voice mail. --44-161-480-9625 UK |
top end reserviceable one piece moulded bladder accumulator.
This is just a small selection from our range of sizes and pressures, all parts are manufactured from many different materials.
Small |
In the alphanumeric designations to the left, the prefix PIG denotes a PipeGuard design i.e. gas inside one-piece moulded bag The number following the prefix that is followed by the letter i denotes the number of cubic inches nominal volume. Units of 16.39millilitres, there are 61 cubic inches in one litre. The B reference is the diameter followed by length of the one piece moulded bag. This is also the spare part reference for a new bag. The number preceding the letter p is the design pressure, this should be used for working pressures up to 85% of the p figure assuming that the system relief valve requires a 15% over pressure to fully open. The inch number denotes National Pipe Thread taper size. The CS denotes carbon steel of an SA(ASME code) designation. A letter needs inserting following the CS which denotes the elastomer of the membrane to be used ex/e.g. N = Buna-N / nitrile, V = Viton etc. |
| PIG-11i-B62x60-4600p-3/4"NPT-CS | |
| PIG-24i-B72x98-5600p-3/4"NPT-CS | |
| PIG-58i-B82x205-4580p-1 1/2"NPT-CS | |
Medium |
|
| PIG-143i-B98x300-4220p-1 1/2"NPT-CS | |
| PIG-198i-B123x295-1880p-2"NPT-CS | |
| PIG-244i-B123x357-1880p-2"NPT-CS | |
Large |
|
| PIG-421i-B139x420-1770p-3"NPT-CS | |
| PIG-647i-B195x360-1490p-4"NPT-CS | |
| PIG-1159i-B195x535-3100p-4"NPT-CS |
If you have a pipeline or pump user problem which requires pulsation analysis, diagnostics, or prediction by software:
The definitions of many problems can be found at Liquid-Dynamics.com. Or send your problem to LiquidDynamics.net.
Liquid Dynamics provides pipeline and pump user problem analysis, diagnostics, and prediction by software. For water hammer and shock solutions pulsation dampening and shock alleviating devices can be obtained from our associate websites PulseGuard and ShockGuard. |
For Hardware see our associate websites: |
www.PulseGuard.com and www.PulseGuard.co.uk for further information about pulsation dampeners and pumping systems. |
www.Shock-Guard.com and www.ShockGuard.co.uk to find large gas bag vessels, jumbo bladders, float separator and big bellows type pipeline shock attenuators and expansion / contraction volume compensators. |
www.Pulsation-Dampers.co.uk for more about pulse dampers in pumping systems and water hammer. |
| Water Hammer and www.Shock-Alleviators.co.uk for more on water hammer, pump start up surge, shut down back flow, & valve closure hammer. |
www.Accumulators-Hyd.com and www.Accumulators.co.uk for information about energy saving in pumping systems, standby emergency power, and safety shutdown systems. |
www.Pulsation-Shock.com for a quick view of how each different type of pulse dampener is matched to a pump installation. Pumps make flow, system resistance to flow is pressure, systems make pressure and pressure pulsation. |
www.Flow-Guard.com to find protection against excess flow. Guard against toxic spills when pipes burst, guard against gushers and fluid loss when hoses split, Flow-Guard guards against excess flow floods. |